Troubleshooting - JVC GET0626-001B Instruction Manual

Troubleshooting

Sound cannot be heard from the
speakers.
"PROTECT" appears on the display
and no operations can be done.
The unit does not work at all.
"AUX" cannot be selected.
SSM automatic presetting does
not work.
Static noise while listening to the
radio.
"AM" cannot be selected.
Disc cannot be played back.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW
cannot be skipped.
Disc can neither be played back
nor ejected.
Disc sound is sometimes
interrupted.
"NO DISC" appears on the display.
"PLEASE" and "EJECT" appear
alternately on the display.
30 ENGLISH
Symptom Remedy/Cause
• Adjust the volume to the optimum level.
• Make sure the unit is not muted/paused (
• Check the cords and connections.
Check to be sure the terminals of the speaker leads
are covered with insulating tape properly, then
reset the unit ( 3).
If "PROTECT" does not disappear, consult your JVC
car audio dealer or a company supplying kits.
Reset the unit. ( 3)
Check the <SRC SELECT> = <AUX IN> setting.
( 24)
Store stations manually.
Connect the antenna firmly.
Check the <SRC SELECT> = <AM> setting. (
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
which you used for recording.
• Unlock the disc. (
• Eject the disc forcibly. (
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
Press 0, then insert a disc correctly.
8)
3)
6).
24)