Computer Modem Dip Switch Settings; Computer Modem Setup String - ACR Electronics PowerWatch Reference Manual

ACR Systems Inc.
Ó 2007,
5.3.6

Computer modem DIP switch settings

Computer modem DIP switch settings
Set the DIP switches to the computer station settings. If you have a US
Robotics modem, set the DIP switches to the settings in the table below. If
your computer station modem has no DIP switches you can skip this step.
COMPUTER STATION MODEM DIP SWITCH SETTINGS (US Robotics)
DIP Switch Number
Setting
1
2
3
4
5
6
7
8
If you have a make of modem other than US Robotics, check to see if the DIP
switch settings are different for the powerup modes listed in the table above.
Next step:

Computer modem setup string

See also:
Setting the dial command
Ó 2007, ACR Systems Inc.
5.3.7 Computer modem setup string
Computer modem setup string
Previous step:
Computer modem DIP switch settings
1. At your computer, using a standard modem cable, connect the computer
station modem to an available serial port on your computer. (This step is
unnecessary if you have an internal modem installed in your computer.)
2007 ACR Systems Inc.
PowerWatch Operating Overview
Powerup Mode
Use Normal DTR operation
Use Verbal result codes
Enable Result codes
Echo local commands
Disable Auto answer
Use Normal CD operation
Load user defaults
Recognize AT commands
68
DIP Switch
UP
UP
DOWN
UP
DOWN
UP
UP
DOWN