Table of Contents
Advertisement
See also:
Modem overview
Remote modem connection
Ó 2007,
ACR Systems Inc.
5.3.2
Modem overview
Modem Overview
Communication with a remote
modems: a modem connected to your computer and a modem connected to
the VDR at the remote site. Each modem must be configured before it can be
used for communication.
The configuration instructions we give apply to the USRobotics Sportster
14,400. If your modems are made by another company you will have to check
their manuals to get an equivalent setup string and/or DIP switch settings.
Setting up modem communication can sometimes be problematic; we have
explained the operation as simply as possible in three main steps:
NOTE: Configure the remote station modem before you configure the
computer station modem. The first step in remote modem configuration is:
A . Configuring the remote station modem
See the following three topics:
B. Configuring the computer station modem
See the following three topics:
C. Connecting the system and testing
See the following two topics:
2007 ACR Systems Inc.
remote modem.
1.
Remote modem DIP switch settings (for configuration)
2.
Remote modem setup string
3.
Remote modem DIP switch settings (for operation)
1.
Computer modem DIP switch settings
2.
Computer modem setup string
3.
Computer modem dial command
1.
Connecting the remote modem
2.
Dialing the remote site
PowerWatch Operating Overview
VDR
is possible over a telephone line via two
64
Advertisement
Table of Contents
