Entering Ship Settings - ACR Electronics NAUTICAST INLAND AIS Installation Manual

4.3 Entering Ship Settings

Select from the Main Menu "Ship Settings" Menu is USER password protected with default
password "NAUT". Enter Password and use the up and down arrows to edit Ship Settings
then press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter ATIS Code / Call Sign.
Select and enter Ship Name.
Select and enter Length of Convoy (in m).
Select and enter Beam of Convoy (in m).
Select and enter Internal and External GPS antenna positions.
Select and enter Length of Ship (in dm).
Select and enter Beam of Ship (in dm).
Installation Manual
N 1^23' E 0^16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->|
N 1^19' E 0^12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
Atis Code :max. 7ASCII
ShipName :Nauticast
Length(Conv):400m
Beam(Conv) :32m
RefPtExt :A380 B20 C8 D24m
RefPtInt :A380 B20 C8 D24m
Length(ship):600dm
Beam(ship) :220dm
----------------------------------------
| Save | |
| |<-Back
+------+
| |
| A
| |
| x--|
| | B
| | |
+-C-+D-+
| Back
36
Y1-03-0212 Rev.B