Still Image Continuous Shooting And Bracketing - JVC UGZ-X900 Manual Book

Hd memory camera
Table of Contents

Advertisement

Recording Files
Although still images can be taken
continuously while SNAPSHOT is being
pressed, recording stops once the recordable
time is exceeded.
At this time, SNAPSHOT will not work until
the writing to the media is completed.
The photo indicator lights up
immediately on the LCD monitor when
SNAPSHOT is pressed.
NOTE
Recording cannot be performed when the
menu is displayed.
Close the menu.
Functions that are only available in still image
mode cannot be used.
(Example: flash, GAIN, etc.)
The number of recordable still images
depends on the remaining space on the
recording media.
The size of recorded still images is 3072 x
1728, regardless of the image size that is set.
The still images recorded in the video mode
contains a little more noise than the still
images recorded in the still image mode.
Simultaneous recording (still image
recording) may be performed even when the
dial is set to [M].
Still Image Continuous Shooting and
Bracketing
You can record still images continuously.
Preparation:
Select the recording mode.
1
Turn the recording dial and set to the
#
mode (
, SCN, M) that best suits the
subject to be recorded.
2
Touch the shutter mode and select
RECORD ONE SHOT, CONTINUOUS
SHOOTING, or BRACKETING.
RECORD ONE SHOT: Records one still
image.

EN
(Continued)
Records one still image at a time.
After performing steps 1-2
3
Records still images continuously while
SNAPSHOT is pressed.
You can set the continuous shooting speed
from the menu. (Z p. 71)
After performing steps 1-2
3
(There will be no indicator display on the
LCD monitor when recording one image.)
{
CONTINUOUS SHOOTING: Records still
images continuously.
J BRACKETING: Records 5 still images of
different brightness continuously.
RECORD ONE SHOT
Press SNAPSHOT.
CONTINUOUS SHOOTING
Press and hold SNAPSHOT.
Recording ends when SNAPSHOT is
released.
The display during medium and high speed
recording is as follows.
Red: Number of recorded images
Green: Saving in progress
Although still images can be taken
continuously while SNAPSHOT is being
pressed, recording stops once the recordable
time is exceeded.
At this time, SNAPSHOT will not work until
the writing to the media is completed.
NOTE
Recording cannot be performed when the
menu is displayed.
Close the menu.
The number of recordable still images
depends on the remaining space on the
recording media.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-x900Gzx900us - everio camcorder - 1080i

Table of Contents