Dubbing Files To A Vcr/Dvd Recorder - JVC UGZ-X900 Manual Book

Dubbing Files to a VCR/DVD Recorder

Preparation:
•
Create a playlist.
•
Turn off all units.
To connect using the AV connectors

(analog dubbing)
AV Cable
VCR/DVD Recorder
AV Connector
•
When other devices such as a DVD burner
are connected to the Everio dock, turn the
power of these devices off.
AV Connector
DC Connector
AC Adapter
(Input)
To AC Outlet
1
Open the LCD monitor to turn on the
camera.
2
Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camera are
input correctly to the VCR/DVD recorder.
3
Play back playlists on the camera.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
4
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
To stop dubbing

Stop recording on the VCR/DVD recorder.
To hide the date or icons on the screen

Change the settings in [DISPLAY ON TV].
(Z p. 73)
Switching indication modes on LCD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below:
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/No
indications

EN