Table of Contents
Advertisement
Necessary Settings before Use
Charging the Battery Pack
1
Open the LCD monitor.
2
Attach the battery pack.
AC Adapter
to AC Outlet
(110 V to 240 V)
3
Close the LCD monitor and connect
the AC adapter.
•
You can also connect the AC adapter
using the Everio dock connector.
(Z p. 9)
•
The power/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
finished.
•
Unplug the AC adapter from the AC
outlet and disconnect the AC adapter
from the camera.
To check the remaining battery power
See page 24.
Battery pack
Charging time Recording time
BN-VF908U
(Provided) /
1 h 50 m
BN-VF808U
1
EN
To detach the battery pack
Open the LCD monitor and turn off the
camera using the DISPLAY/< button before
detaching the battery pack.
NOTE
•
You can also use the camera with just the AC
adapter. (Z p. 4)
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Date/Time Setting
1
Open the LCD monitor to turn on the
camera.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
4
Select [CLOCK ADJUST].
1 h 15 m
Advertisement
Table of Contents
