Table of Contents
Advertisement
GETTING STARTED
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Attaching the Core Filter to the DC cord
The core filter reduces interference. Connect the end of the cable with the core filter to the camera.
Release the stopper.
Effective distance:
Within 5 m (16.4 ft)
3 cm (1-3/16")
To Reinsert the Battery
Pull out the battery holder by pressing the lock
tab.
Lock Tab
Lithium Battery
(CR2025)
Wind twice
1
EN
Advertisement
Table of Contents
