Table of Contents
Advertisement
Still Image Recording
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
mode.
MODE
#
The
lamp on the camera lights up.
8 To change the picture quality
Change the settings in [QUALITY].
(
pg. 68)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. (
pg. 68)
8 To change the image size
Change the settings in [IMAGE SIZE].
(
pg. 68)
NOTES
•
DIS (Digital Image Stabiliser) does not function during still image recording.
•
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the power/
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as
zooming.
•
The sides of still images recorded in 16:9 size may be cut off when printed. Check whether
16:9 size prints can be printed at your local print store.
#
(still image)
The switch returns
to the original
position when it is
released.
Press the PLAY/REC button to
select recording mode.
SELECT
PLAY/REC
Press and hold the SNAPSHOT
button halfway.
The ? indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
20
19
1920
[
FINE
[ 9 9 9 9 ]
FINE
PHOTO
21
Advertisement
Table of Contents
