Table of Contents
Advertisement
Necessary Settings before Use
Charging the Battery Pack
1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then
connect the AC adapter.
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
finished.
1
DC Jack
AC Adapter
To AC Outlet
(110V to 240V)
L
To check the remaining battery power
See page 24.
L
Required charging/recording time
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack
Charging time
BN-VF808U
1 hr. 50 min.
(Provided)
BN-VF815U
2 hr. 40 min.
BN-VF823U
3 hr. 40 min.
L
To detach the battery pack
Slide and hold BATT. (
remove the battery pack.
NOTE
•
You can also use the camcorder with just
the AC adapter.
•
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving subject.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Recording time
2 hr. 45 min.*
5 hr. 25 min.*
8 hr. 10 min.*
step 2), then
Z
Advertisement
Table of Contents
