Voice Coding Technology - Icom IC-F3162DT Instruction Manual

PRECAUTIONS
BE CAREFUL!
operating it continuously for long periods of time.
KEEP
the transceiver away from the heavy rain, and never
immerse it in the water. The transceiver meets IP55* require-
ments for dust-protection and water jet resistance.
However, once the transceiver has been dropped, dust-pro-
tection and water jet resistance cannot be guaranteed due
to the fact that the transceiver may be cracked, or the water-
proof seal damaged, etc.
* Only when the supplied battery pack, flexible antenna and connec-
tor cover are attached.
Even when the transceiver power is OFF, a slight current still
flows in the circuits. Remove the battery pack or batteries from
the transceiver when not using it for a long time. Otherwise,
the installed battery pack or batteries will become exhausted,
and will need to be recharged or replaced.
MAKE SURE
connecting the supplied/optional equipment.
iii
The transceiver will become hot when
to turn the transceiver power OFF before

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed sole-
ly for use within this Communications Equipment. The user
of this Technology is explicitly prohibited from attempting to
extract, remove, decompile, reverse engineer, or disassem-
ble the Object Code, or in any other way convert the Object
Code into a human-readable form. U.S. Patent Nos.
#5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166.