AMD Athlon Installation Manual page 7

23986—December 2000
6. Figure 6 shows a sampling of the typical heatsink assemblies that are commonly
used on the AMD socketed processors. Notice that the assemblies vary in size, fin
density, and clip design. The appropriate heatsink to use will be determined by:
• The list of approved thermal solutions on the AMD website.
• Availability of the approved thermal solution in your area.
Log onto the www. amd.com website for a listing of tested heatsink/fans that AMD
recommends. Only use a heatsink/fan assembly that has been AMD tested and recom-
mended for your AMD processor speed and model. The proper heatsink is essential.
Notice the two different types of heatsink retaining clips shown in Figure 6. The
style with the slight hook is designed to be installed with the open end of a nut-
driver (looks like a screwdriver with a socket attached). The style of clip with the
slotted end is designed to be pushed down with a screwdriver inserted into the
slot.
Caution: When engaging the heatsink clip with either installation tool, use extreme
care when pressing down on the clip. If the tool slips off the clip, the system
motherboard can be damaged.
Figure 6. Typical Heatsinks Suitable for Use with Socket A AMD Processors
Slot
Hook
Socket A AMD Processor Installation Guide
Slot
7