Chapter 9 Operation And Maintenance; Daily Maintenance; Checking The Server Status; Cleaning - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Chapter 9 Operation and Maintenance

9.1 Daily Maintenance

This section explains how to check the status of the operating server, as well as how
to perform daily maintenance.
●
PRIMERGY information
For the latest information on PRIMERGY, update modules, drivers, and software, refer to the Fujitsu
PRIMERGY website.
http://primergy.fujitsu.com

9.1.1 Checking the Server Status

Use the status LED or server monitoring tool to check the server status.
■ Checking Each LED
This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For positions and functions of each status
LED, refer to"1.3 Component Names and Functions" ( pg.23).
■ Server Monitoring Tool (ServerView)
ServerView is software that monitors whether the server hardware is in a normal state in order to protect
important server resources. When using ServerView, the server hardware is monitored all the time. If an
error that could cause trouble is detected, the administrator is notified in real-time which enables early
detection. This allows the server administrator to remove a system error early and avoid trouble.
For an overview and installation of ServerView and other high reliability tools, refer to "1.2.2 High
Reliability Tools" ( pg.20) and "Chapter 6 High Reliability Tools" ( pg.169).

9.1.2 Cleaning

Clean the server regularly.
Clean the server as follows.
228
• Before cleaning, turn off the server and unplug the power cables from the
outlets. Also, power off peripheral devices and disconnect them from the
server ( "1.4.3 Turning Off the Server" (pg.33)).
Failure to do so may cause electric shock.