Table of Contents
Advertisement
Setting
Click [Setting] in Fig VI-8 and the screen will change to Fig VI-9 as shown below.
Type in the [Username] and [Password], which must correspond with the user name and password on the
DVR side. Type in the IP address in the [Server] column, then type in the [Port] for connection such as 7050.
Click [OK] to save and exit the screen.
Fig VI-9 Mobile phone settings Fig VI-10 Mobile phone screen
Preview
Click [Connect] in the screen show as Fig VI-8, and Fig VI-10 will display as above, after several seconds of
buffer.
You can select the channel you want to preview by selecting the channel in the pull-down [Channel] menu, or
you can click [Disconnect] to stop the preview.
Operations
Fig 5-11 Button operations on mobile phone
all of these buttons are operated by PTZ.
From left to right, they are [Turn Left], [Turn Right], [Move up], [Move down], [Zoom out], [Zoom in], [Focus
away], [Focus close], Enlarge Iris, Narrow Iris.
is for picture capture.
Note: Thank you for using our product. The installation above is with the Windows Mobile operating system.
There may be some differences between different software versions and operation systems that may not be
noted here.
We encourage the use of a qualified installer to install this product around your household or office. The
installer/buyer take full responsibility of the installation of this product being safe and fully functional.
28
Advertisement
Table of Contents
