Camera Control - Kogan KACCTV4CHA User Manual

➀
The current recording schedule
➁
The record schedule
➂
Description of record type
Users are free to select a week day or the day of a period of time. The system provides a recording option
for hours every day, or a week day. Each unit (measured by a grid square) indicates one hour.
➀
Move highlight icon to a time grid using the [Direction] buttons.
➁
Specify the recording type by repeatedly pressing [OK] button or double left clicking the mouse.
(The colour of the grid will change accordingly.)
➂
Select [OK] to confirm settings. The settings will take effect after being saved.
NOTE: Users can copy the current setting onto a neighbouring grid by pressing [Fn] button first, [Direction]
buttons secondly, and then the [Fn] button again to exit. Alternately, user can drag the mouse to set.
NOTE: When motion detection recording is selected, the motion detection sensitivity and area should be set
ahead of time. Please refer to 4.4.2 Motion Detection settings for details. When alarm recording is
selected, the alarm triggering settings should be set ahead. Please refer to 4.7.2 Event Handling for details.

4 Camera Control

PTZ Control
Enter <Tool Bar>→<System>→<Video> to set camera channel, protocol, baud rate and ID.
NOTE: The different PTZ controlled by one PCI should have corresponding PTZ IDs. There are 256 PTZ IDs
supported currently, 0~255.
PTZ Operations
In preview mode, select a tile first (in 4/9/16 splits view mode, the selected tile is with the highlighted green
border), using mouse or [Numbers] buttons, and then enter <Tool Bar>→<PTZ Control> to the PTZ Control
screen that is shown as the table below.
Fig IV-2 Record Schedule
Table IV 1 PTZ Operation Description
11