Table of Contents
Advertisement
8 Backup
Enter <Tool Bar>→<Playback> to search, backup and playback the specific record files you need. Click
[Backup] to enter into the backup screen. The system will detect the backup devices available and display
them. Please select the suitable device and record type according to your requirements first, then click
[Backup] to start storing.
NOTE: The record types include H.264 Raw, MP4 and AVI. When backing up to MP4 files, the special player
plugin will also be backed up to the USB storage. After the player plugin is installed, the stored video files
can be played by Windows Media Player.
9 Alarm Settings
Please make sure that the alarm input and output cables are connected correctly. Please refer to 2.6 Rear
Panel Connection for details.
Select <Tool Bar>→<System>→<Alarm Setting> to configure the alarm parameters in the pop-up screen.
NOTE: All settings will take effect after being saved.
1) Alarm Input
The alarm input attribution includes N/O and N/C. Please select a suitable attribution according to the types
of alarm device connected and control modes of the alarm device adopted.
N/O: Normally open. Circuit connected when the alarm signal is triggered.
N/C: Normally connected. Circuit is opened when the alarm signal is triggered.
2) Alarm Linkage
The alarm triggered event handling includes: record/alarm output/PTZ/sound output/alarm zoom out/E-mail
/report to center/FTP upload file. The channel alarm input can zoom display interval 1-10s optional.
If the display interval time is set to go off, the zoom display will be invalid.
After using the "zoom out image", Alarm zoom out, report to center, IE client preview will zoom out
simultaneously.
NOTE: If the user wants to set alarm triggered record, please set the record schedule first at "Record
schedule".
NOTE: If the user wants to set alarm triggered PTZ, please select the channel number first, and then to set
(only preset 1 can be selected).
NOTE: After alarm, email will be sent immediately with the attachment of the captured snapshot.
NOTE: Once FTP server is set, the FTP will upload the file after the alarm. FTP server will receive the
captured snapshot.
3) Alarm Defence and Schedule
The user can enable customised schedules in the advanced menu, which is similar to the schedule record.
In the alarm defence status, the alarm icon will appear in yellow.
4) Device Exception Action
Select <DEVICE EXCEPTION ACTION>→Enter Device exception handle screen. Choose among these
three options: HDD Full, network disconnect and IP conflict. For the full hard-drive setting, user can select
"Alarm Output"/"Sound"/"Report to Center"/"Email".
Network disconnect and IP conflict can only be set to "alarm output"/"Sound".
After this setting has been saved, the device exceptions will be handled the way the user has selected.
14
Advertisement
Table of Contents
