Table of Contents
Advertisement
1) Channel Status Display Area
Under preview mode, channel shows current input image and channel status information (video status and
mode, motion detection)
View Mode Switching
When in 1/4/6/8/9/16 splits view mode, the tile with the highlighted green border is the currently selected one.
The user can use the mouse or press the direction buttons to switch to another tile. If the audio output
device is connected, the audio can be previewed together with video. The audio of the current channel can
be previewed besides in playback mode.
Users can select to display a particular channel by pressing the number buttons.
When in preview mode, user can enter into 1/4/6/8/9/16 splits view mode by pressing the
directly, or vice versa.
NOTE: For 8 channel DVR, the view mode can be directly switched by tool bar. Please refer to 4.2.3 "Tool
Bar".
Image Parameters Setting
Please enter <Tool Bar>→<System>→<Video>→<Colour Setting> to set brightness, contrast, hue and
saturation. It will take effect instantly.
NOTE: User can set image parameters of one channel one at a time, or for all channels at once by selecting
[ALL] in <Camera Channel>. It is similar to other screens when the user wants to set four channels together
at once: select [ALL] in <Channel>.
NOTE: In preview mode, brightness and contrast can be adjusted by the remote controller directly.
OSD Settings
The OSD of channel name and system time is supported. Please enter <Tool Bar>→<System>→<Record
Setting>→<OSD Setting> to set. The channel name will be displayed on the left upper corner, and the
channel time will be displayed on the right corner of the screen.
Channel Status Display Area
The channel statuses include: "motion detection triggered recording" / "common recording" / "motion
recording" / "alarm triggered recording" / "external alarm input" / "alarm output".
Indication of "motion detection" / "common recording" / "alarm recording" will be displayed on the right upper
of screen. Details are as follows:
indicates "motion detection". The settings of motion detection include sensitivity and area selection.
Please see "motion detection settings" for details.
Blue indicates "common recording". Please see Record for details.
Green indicates "motion detection triggered recording".
Red indicates "alarm triggered recording".
Grey indicates "manual recording".
Indication of "external alarm input" / "alarm output" will be displayed on the system status column or tool bar.
Details are as follows.
: The 4/8 icons indicate the alarm input status. If alarm defence mode is set, the icon is
is
. When alarm is triggered, the icon changes to red
handling. Please see alarm settings for details.
: The 1/4 icons indicate alarm output. When alarm output is occurring, it changes to red
System status bar
In preview mode, the system status bar will display the current system status, including: "External alarm
input" / "Alarm output" / "Hard disk capacity" / "Number of Client connection" / "System Time".
indicates the disk is OK. Number displayed indicates the capacity percentage of the disk remaining.
indicates "Hard disk error" or "No hard disk".
indicates client connection. The number shows the client linking number.
indicates "no client connection".
. External alarm input can trigger multiple events
9
button
, otherwise it
.
Advertisement
Table of Contents
