Network Operation - Kogan KACCTV4CHA User Manual

10 Network Operation

1) Network Settings
Please enter <Tool Bar>→<System>→<Network Setting>→<Network Connection>, there are three
connection types: Static IP, DHCP and PPPoE.
Static IP: If this type is selected, please type in the IP address, subnet mask and gateway. User can ping
the network to check the connection status.
DHCP: If this type is selected, a DHCP server should be set in the network. A dynamic IP for the device will
be assigned automatically and displayed in the IP address column.
PPPoE: Click [>>], the PPPoE setup screen will appear. Type in your user name and password, then click
[OK] to confirm. System will then dial automatically. After accomplishing dialling, the IP address will be
assigned and displayed automatically in the IP address column. User can save the user name and
password if dialling is not successful.
The following are types of ports:
*HTTP Port: It is the port number while browsing through a web browser. Default is 80.
*Signal Port: It is the first entry port for communication between web client and device, which is mainly used
for controlling of log-in, log-out, real-time preview, remote playback and remote download etc.
*Media Port: It is for media stream transmitting, including real-time stream, voice stream and file stream etc.
*DDNS: Click [>>], the DDNS setup screen will appear. Select a DDNS server and type in the DDNS
address, user name and password.
*Auto Registration: Select activating Auto Register and click [>>], the register setup screen will appear. Type
in the register server IP port and register interval time.
*File Sharing: After activating file sharing functions, the PC is able to access video files in DVR HDD via
network neighbourhoods.
*Sharing File Access Methods: Open Network neighbourhood, type in \\IP address (for
example: \\192.168.10.220), then enter the login interface. Type in the Super Admin username and
password, then the shared files can be accessed. (Open the folder "videoout")
Note: After the player plugin has been installed, video files can be played via Windows Media Player.
*Email Setting: Click [>>], the EMAIL setup screen will appear. This function requires the function of alarm
linkage to be used. Enter the mail server address in the screen (support domain method), login account,
password, recipient and sender email address. Press the [Test] button next to the sender email address to
send a test email.
*Mobile Port: Port is the channel for mobile phone data transmission. All media and signalling data will be
transmitted via this port.
*FTP Server: Select FTP upload, then click [>>] to set the FTP server IP, username and password. The
captured snapshots will then be uploaded to the FTP server.
*UPNP: Start UPNP then select [>>]. The device will automatically find the intranet modem UPNP service
and map the HTTP, signal, media, mobile phone port and return the map result and the modem's internet IP.
After mapping is successful, the user can access the IE client from an internet PC through the internet IP.
*IP ACCESS: When turned off, any PC can access the device. When a blacklist is in use, a PC with an IP
entered into the blacklist cannot access the device's IE client, however PCs not on the list can access it.
When a whitelist is in use, a PC with an IP entered on the white list can access the device's IE client, but
other PCs cannot.
*Time Synchronisation: Click [>>] to start synchronisation. The device can automatically synchronise by
setting the server name, synchronisation interval and time zone.
Note: All of these network settings will take effect after being saved.
Note: Currently on supports PPPoE mail servers with SMTP protocol.
Note: Enter into mobile phone system and type the IP address into the IE address column in the form of
http://xxx.xxx.xxx.xxx/download.html. Versions supported by the client side are as follows:
English/Simplified Chinese/Traditional Chinese. Client side of Symbian60 3 rd Operation System:
English/Traditional Chinese. Client side of WinMobile5.0/6.0/6.1 Operation System; iPhone mobile can be
supported. Please refer to "Appendix 5: Introduction of Mobile Phone Monitor" for more details.
2) Web Client Operation
Open the IE browser, type in the IP address and the log-in screen will appear.
Note: If PPPoE or DHCP is selected, the user has to check their IP addresses again after restarting.
Note: If it is the first time you are logging in through IE, please install the Active X of IE and type in the user
name and password. The default username and password are Admin (case sensitive). If the plug-ins cannot
15