Record - Kogan KACCTV4CHA User Manual

Tool Bar
Right click the mouse or press [OK] in preview mode to show the Tool Bar, as shown below.
: Hide the tool bar.
: System configuration. Please see 3.1 Menu Structure for details.
: Manual record. Please see 4.3.1 Manual Record for details.
: Search, playback and backup record files. Please see 4.5 Video Playback and 4.6 Video Backup for
details.
: PTZ operation. Please see 4.4.1 PTZ Control for details.
: Click to cancel alarm notification. Click this button for a pop-up of the present alarm information.
: Fast playback. User can enter 10, 20, 30 or 60 seconds before position start playback, and can also
jump to a specified time in the video.
: Power off. Clicking this button will pop up a "confirm password" message. User has to enter the
Admin password to shut down.
, , , ,
splits view", "9 splits view" and "16 splits view".
: Fast switch TV and VGA. Menu will not be available on the current screen, only a preview image.
: To adjust the screen, 8 pixels per unit.
, : To reduce or increase screen vertically.
, : To reduce or increase screen horizontally.
: To move the screen up, down, left or right.
: To zoom out the screen to maximum and show in the central position.
NOTE: When the mouse moves to the tool bar icon, the indication information will appear to help give the
user guidance.
NOTE: When the video source is PAL, the screen display range max is 720x576. When the video source is
NTSC, the screen display range max is 720x480.
NOTE: Switch display menu between VGA and TV by selecting [ESC]→[1]→[ESC] (sequence must be
pressed within 3 seconds) on the remote control or front panel.

3 Record

Record type contains manual record and schedule record. The priority of manual record is higher than
schedule. If the record schedule is conflicted with the manual recording, the manual recording will be
recognised and processed until the manual recording is cancelled.
Record types include "common recording" / "alarm triggered recording" / "motion detection triggered
recording" / "alarm / motion detection triggered recording". Each is indicated with a grid of a different colour,
and each colour indicates a particular recording status. Please see Fig IV-2 Record Schedule for details.
Record resolution: The device supports "CIF" / "HALF D1" / "D1" formats.
Record quality: "Best 768Kbps" / "High 640Kbps" / "Better 512Kbps" / "Common 384Kbps".
Record frame rate: If the current selection is PAL, the frame rate options are "All" / "12" / "6" / "3" / "1" /
"Customised". If the current selection is NTSC, the frame rate options are "All" / "15" / "7" / "3" / "1" /
Customised". Default is "All" which is 25fps for PAL and 30fps for NTSC.
Record resource: "Video" for video only, or "Video and Audio" for recording video and audio.
NOTE: Please refer to Appendix 6.2 for the methods of calculating HDD capacity.
Manual Record
Please enter <Tool Bar>→<Manual Record> to let the specific channel record.
Press the [●] button to start/stop recording manually.
NOTE: The type of the video recorded manually is known as "common recording".
NOTE: The highest priority of recording is manual recording.
Record Schedule
Please enter <Tool Bar>→<System>→<Record Setting> to set the record schedule. The setting screen is
shown as the figure overleaf.
Fig IV: System Toolbar
, : Set the preview mode of "Single splits view", "4 splits view", "6 splits view", "8
10