Advanced Settings - Kogan KACCTV4CHA User Manual

12 Advanced Settings

Note: Operations in this chapter require permission referring to the current user's authority. Please use the
admin account to log in.
1) System Settings
Please enter <Tool Bar>→<Settings>→<System>→[Advanced Settings>>]
Select <PREVIEW CRUISE>→[>>] to enter the setting screen. Set the preview cruise interval, 1/4/9
•
cruise. It will take effect after saving the settings, where the screen will cruise in accordance to the
setting intervals over the segmentation preview.
Select <DVR IDNUMBER> and the number entered can be between 1 ~ 99. The remote controller
•
and 485 keyboard can control the device one on one when setting the same number.
Select <SPOT SETTING>→[>>] to enter the setting screen. Set SPOT channel and time, the
•
DWELL time sets the period for which a channel can be selected.
Click [Add] to add the channel to the Matrix output. After being saved, the video output will take
•
effect. All video channels connected with video inputs to the DVR can be sequentially switched for
SPOT monitoring output.
Select <DST>→[>>] to enter DST (Daylight Savings Time) settings. Users can set beginning and
•
ending dates and times of DST. Device will automatically adjust the time after being saved.
After starting <menu timeout>, when there is no mouse motions on the menu, preview screen or
•
search screen for a certain time, the control device will automatically lock the screen. User needs to
re-login to unlock the screen. (PTZ, video playback and back-up screens will never lock).
Select <Channel Lock>→[>>] to enter the channel lock setting screen. Click the channel as desired,
•
then select [OK]. The user cannot see the locked channel after they log out. Only the admin
account can set and unlock channel lock settings.
Note: <System setup>→<Advanced Settings>, user can set recourse distribution mode, code mode and
playback mode.
2) User Management
Please enter <Tool Bar>→<Setting>→<System Setup>→<Advanced Setting>. Select <ADD USER>→[>>]
to enter the settings screen. The password for the new user is 111111, then the user can enter <Tool
Bar>→<Setting>→<System>→<Password Settings> to modify the password. Select <DEL USER>→[>>] to
enter the setting screen, then the Admin can delete the specified user.
Select <AUTHORITY MANAGE>→[>>] to enter the settings screen.
Authority settings contain the authority options for local and remote settings.
Move the highlight around the options using the [Direction] buttons. Press [OK] button or click the mouse to
select the option.
3) Advanced Setting of Record
Please enter <Tool Bar>→<Setting>→<Record>→[Advanced Setting>>]→<SUB STREAM>, select Enable,
press [>>] to enter the setting screen. The user can then customize the sub-stream frame rate and bit rate.
Sub-stream supports 1-15 frame rates, and 32K-512K bit rates.
Fig IV 3 Authority Settings
20