Cleaning
the
Printhead
If the nozzles seem to be clogged and characters are not
printing completely, clean the printhead as described below:
1
Press Setup and find 'MAINTENANCE' by
pressing ➛ or ❿.
2
Press Start/Enter and scroll to 'CLEAN HEAD'
by pressing ➛ or ❿.
3
Press Start/Enter.
The test pattern is printed.
4
Examine the test pattern.
If print quality does not improve, re-install the
cartridge and repeat CLEAN HEAD. If the line is
still broken, wipe the nozzles and contacts.
For more information on cleaning them, see
"Wiping the Print Nozzles and Contacts" on
page 7-6.
Care and Maintenance
7-9