Table of Contents
Advertisement
4
Gently blot and wipe the contacts and nozzles
dry.
Use a clean cloth dampened with water only to
gently clean the entire copper-colored area,
including the nozzles and contacts.
To dissolve any dried ink, hold the damp cloth
against the nozzles for about three seconds.
5
Re-install the Cartridge and close the Cover and
Panel.
The display shows 'NEW '.
6
Press Start/Enter after selecting the cartridge
type: OLD or NEW by pressing ➛ or ❿.
If the line is still broken, clean the Cartridge
Carrier contacts (see next page).
Care and Maintenance
7-7
Advertisement
Table of Contents
