Konica Minolta magicolor 2300 DL Installation Manual page 26

International Notices—Power Cord
The following power cord requirements are in effect for your 220~240 V ±10% printer.
Minimum: 0.75 mm 2
Minimum: H05 VV - F
The male plug is certified in the country in which the equipment is to be installed, and the
female plug is an IEC 60320 connector.
International Notices—Voltage
Attention Norwegian users: This equipment is designed to operate within an IT power system
where the line-to-line voltage does not exceed 240 V.
Ozone Release
During printer operation, a small quantity of ozone is released. This amount is not large
enough to harm anyone adversely. However, be sure the room where the printer is being
used has adequate ventilation, especially if you are printing a high volume of materials, or if
the machine is being used continuously over a long period.
22 Safety Information