Warranty Considerations - Konica Minolta magicolor 2300 DL Installation Manual

Warranty Considerations

Various factors can affect a printer's warranty, such as electrostatic damage,
unsupported consumables, and other actions listed on the following page.
Read your printer warranty carefully. For information about your warranty, go
to www.minolta-qms.com/support, then click on the Answer Base.
If MINOLTA-QMS printer failure or damage is found to be directly attributable
to the use of non-MINOLTA-QMS approved consumables, print media, and/or
accessories, MINOLTA-QMS will not repair the printer free of charge. In this
case, standard time and material charges will be applied to service your
printer for that particular failure or damage.
These Actions Will Result in Voiding Your Warranty
Print Media
Electrostatic
Discharge
Instructions
Modifications
Consumables
OPC Drum
Cartridge and
Toner Cartridge
Accessories
Attention
Don't return any merchandise to the MINOLTA-QMS without calling for a
Return Merchandise Authorization (RMA) number (US only). Refer to the
Service & Support Guide or www.minolta-qms.com for the Technical
Support telephone number where you can obtain an RMA number. If the
RMA number is not prominently visible on the outside carton of items
returned, MINOLTA-QMS will not accept receipt.
Warranty Considerations
Use of nonsupported media, such as inkjet paper.
See "Using Media" in the User's Guide for approved
media. Contact your local vendor or
www.minolta-qms.com for purchase information.
Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Failure to follow instructions in the printer documentation.
Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Use of consumables not manufactured or supported by
MINOLTA-QMS. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Any damage resulting from mishandling the OPC or toner
cartridge.
Use of accessories not manufactured/supported by
MINOLTA-QMS.
23