Konica Minolta magicolor 2300 DL Installation Manual page 19

If you want to change the message window language, use the following
control panel sequence (slightly dependent upon the installed options):
Press Key
Selecting an Ethernet IP Address
You must enter a unique IP address compatible with your local Ethernet
network environment.
" #
When manually setting the IP address, turn off DHCP and BOOTP
first.
Attention
You should always notify your network's administrator before changing
the printer's IP address.
IP ADDRESS, SUBNET MASK, and GATEWAY are displayed only when both
DHCP and BOOTP are set to off.
1
Turn on your printer.
2
On the control panel, change the IP address of your printer:
Press Key
About the Control Panel
(Until) Display Reads
IDLE/MAGICOLOR 2300DL
MENU
LANGUAGE
LANGUAGE SET
ENGLISH
Press the Right or Left key until the appropriate
language is displayed.
< LANGUAGE
Press the Up key to return to IDLE.
(Until) Display Reads
IDLE/MAGICOLOR 2300DL
MENU/LANGUAGE
Press the Right or Left key until MENU/NETWORK is
displayed.
> is selected.
15