Status Page; Packet Filtering Page - Zoom 3G+ Modem/Router User Manual

Status Page

The Status page shows you the status of the inbound and outbound Packet Filters
and the Domain Filters. Inbound, Outbound, and Domain filters are disabled, by
default.

Packet Filtering Page

Packet Filtering allows you to control what packets are allowed to pass through the
Modem/Router. Outbound Packet filters control outbound packets and Inbound
Filtering controls packets coming from the Internet. Inbound Filters applies only to
packets going to a Virtual Server or DMZ. Most users will not need to setup Packet
Filtering.
When you click on Packet Filters from the left-side menu, it takes you to the
Outbound Packet Filtering page. If you need to set up an Inbound Filter, click on
Inbound Filter button at the bottom of the page.
Filtering Policies
You can select one of the two filtering policies:
Allow all to pass except those that match the specified rules
Deny all to pass except those that match the specified rules
Filtering Rules
You can specify eight rules for each direction: inbound or outbound. For each rule,
you can define the following:
Source IP address
70 3G+ Modem/Router with Wireless-N and Phone Port User Manual