Duct Design - Toshiba MMD-AP0074SPH-E Installation Manual

SMMS Slim Duct Type
Perform heat insulating
• As shown in the figure, cover the flexible hose and hose band with the attached heat insulator up to the bottom
of the indoor unit without gap.
• Cover the drain pipe seamlessly with a heat insulator to be procured locally so that it overlaps with the attached
heat insulator of the drain connecting section.
Wrap the attached heat insulator seamlessly from
the surface of the indoor unit.
Attached heat
insulator
* Direct the slits and seams of the heat insulator upward to avoid water leakage.
19-EN
Installation Manual
Flexible hose Hose band
Heat insulator to be
procured locally
Hard vinyl chloride pipe
SMMS Slim Duct Type
6

Duct Design

Arrangement
Referring to the following dimensions, manufacture duct at the local site.
<Under air intake>
12.5
100 100
<Back air intake>
12.5
100 100
– 10 –
805
12.5
100
100 100 100 100 100
825
805
12.5
100 100
100 100 100 100
825
Installation Manual
(Unit: mm)
EN
20-EN