Axis VANDALPROOF 3 User Manual page 71

To enable motion detection, please tick "Area 1/2/3". Click
"Area 1/2/3" in Area Setting, and draw an area on the preview
screen. When motion in the area is detected, "Motion!" word
will be marked on the live screen, and the camera can send
video or snapshot to specific mail addresses, trigger the output
devise, or save video to FTP/ Micro SD card/ Samba.
If you select "save to SD card", the video or snapshot will
be saved to
Micro SD card. If you also tick E-mail/ FTP/ Samba of "Log"
option, the motion detection log will be sent to E-mail/ FTP/
Samba simultaneously.
• Intervel:
For example, if you select "10 sec" here, once the motion
is detected and action is triggered, it cannot be triggered
again within 10 seconds.
• Based on the schedule:
When the option box is ticked, only during the selected
schedule time the motion detection is enabled. That is,
for example, the 11th hour of
Monday has not been colored in the schedule table, then
no action will be triggered even the camera detects motion
during 11:00~12:00 on Monday.
b. Record File
When an event happens, the IP camera can record a
video clip or take snapshot, and then send to mail/ FTP/
Samba. Select what format you
want to save.
• AVI File (with Record Time Setting): Save AVI video
file. The video length is according to the value you set
71