Axis VANDALPROOF 3 User Manual page 10

Connect power adaptor first, then connect the IP Camera
to PC or network, and set up the network configurations
according to the network environment. About I/O setting, please
refer to chapter VII in User Manual:
The following picture shows a DC 12V connector for adapter
jack plug.
2. Vandal Dome Installation Tips
In order to ensure IP66 waterproof level, please install the
vandal dome according to the instruction.
a. The Unused cable outlet hole must be closed, and
the waterproof connector on the used hole must be
locked closely.
"I/ OConfiguration" for detail.
10