Axis VANDALPROOF 3 User Manual page 50

Select SNMPv3, add new user, and key in correct
security user name(write). Select the same authentication
type with camera setting for authentication protocol(MD5),
and key in authentication password of write security.
Select the same encryption type with camera setting for
privacy protocol (DES), and key in encryption password of
write security. Click OK to add the user who has write
authority to the camera. Connection succeeds.
If you want to add the new user who has read
authority, key in correct security user name(public), key
in authentication password of
read security, and key in encryption password of read
security.
(iii) SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device
to send messages to manager instead of waiting
passively for polling from the manager. Specify the trap
event. When those events happen, the camera will send
the ring message to the Trap Address, which is usually the
manager's IP address. Trap Community means the
community that can receive the trap message.
Note: Trap Address must be under the same LAN with IP
camera.
• Cold Start: The camera starts up or reboots.
50