Axis VANDALPROOF 3 User Manual page 46

To use Https to access camera, open your browser, and key in "https:// (IP
address)/" in the address bar. Now your data will be transmitted via
encrypted communications, and the browser will check your certificate
status. If it shows you a warning message:
That means your certificate is self-signed or signed by distrusted
institution. Click "Proceed anyway" and you can continue going to the camera
page.
b. SNMP(Simple Network Management Protocol)
networked hardware. To manage the IP camera, you have to
prepare a MIB browser or similar tools first. SNMPv1,
SNMPv2c, and SNMPv3 can be enabled simultaneously.
Browser. Depending on your MIS Browser, you may see
different interface and
options. Please refer to the user manual of your MIB Browser.
SNMP provides a simple framework for administering
The following examples are based on MG-SOFT MIB
46
(i)