Axis VANDALPROOF 3 User Manual page 29

• Server Time: It shows current IPCam server time.
• Date Format: Select the date display format.
• Time Zone: Select your time zone. It affects server time
when you use
"NTP" time.
• Enable Daylight Saving: Give the start and end daylight
saving time.
During daylight saving, the time will be 1 hour faster.
• NTP: Key in the NTP server IP address and update interval.
The camera time will be synchronized with NTP server time.
To use this option, if the NTP Server is under WAN, the
camera must be set to access WAN.
• Synchronize with PC's time: In "Date" and "Time" column it
shows your current PC time. Click "Apply" to make the
camera time the same with PC time.
• Manual: Key in the date and time, and click "Apply".
• The date and time remain the same: After you select
"Synchronize with PC's time" or "Manual", and click "Apply",
the selected mark will jump to this option.
2. User Management
IP CAMERA supports three different users, administrator,
general user, and anonymous user.
29