Common Lcd Messages - MAAX Spas Powerpool Owner's Manual

If the LCD
displays... Indicates...
LF Water flow
problem
- Persistent
flow problem
drY No water to
the heater
dr Lack of water
to the heater
SnA Heater sensor A
not functioning
SnB
Heater sensor B
not functioning
SnS Heater sensors
are out of
balance

Common LCD Messages

The following table defines other messages you will frequently see on the LCD display:
Message...
Pr
SLP
Ecn
Std
ICE
- -
24
PowerPool™
What happens...
Heater will shut down
while PowerPool™
continues to function
normally
PowerPool™
functions will
shut down
Heater will shut
down, otherwise
PowerPool™ con-
tinues to function
normally
PowerPool™
automatically
deactivated
PowerPool™
automatically
deactivated
What it is...
Priming mode
Sleep mode
Economy mode
Standard mode
Freeze condition
Water temperature
Possible cause...
- Plugged filter
- Low water
- Slice valves closed
- Block suction returns
- Blocked filter/ skimmer
- Slice valves closed
- Block suction returns
- Blocked filter/ skimmer
- Non-functioning
sensor
- Non-functioning
sensor
What it means...
PowerPool™ is in normal Priming Mode operation
PowerPool™ is in normal Sleep Mode operation
PowerPool™ is in normal Economy Mode operation
PowerPool™ is in normal Standard Mode operation
Pump and Heater will come on to keep water above 45°F
Current water temperature not measured
Corrective action...
- Remove filter and clean -
- Add water
- Contact dealer
- Open valves
- Remove blockage
- Contact dealer
- Open valves
- Remove blockage
- Contact dealer
- Contact dealer for
replacement sensor
- Contact dealer for
replacement sensor
- Contact dealer
24