Powerpool™ Control System - MAAX Spas Powerpool Owner's Manual

POWERPOOL™ SERIES CONTROL SYSTEM
PowerPool™ swim zone control
All PowerPool™ models utilize the topside control panel shown above. This control panel
operates all functions of the PowerPool™ for the Sport model and the Pro model. This control
operates only the swim zone section of the SuperSport model. This control supports the
following features:
PowerPool™ spa control
This control operates only the spa zone section of the PowerPool™ SuperSport model. This
control supports the following features:
The 460 Control System offers you the
ultimate in PowerPool™ control. The backlit,
Liquid Crystal Display (LCD) displays
current water temperature, set point water
temperature, time, and operating mode
settings. Each feature of the system is actuated
through a control panel touch pad. Touch
the appropriate pad to activate the desired
function. At start up, when power is supplied
to the PowerPool™, the controls will operate
properly and safely under the factory settings.
The PowerPool™ will be in Standard Mode,
a temperature setting of 100°F (38°C), and
16
PowerPool™
• 3 Dual-speed Jet Pumps
• Underwater LED lighting
• Ambient Interior LED
• Temperature Setting
• Customized Filtration
• 1 Dual-speed Jet Pump
• Underwater LED lighting
• Ambient Interior Mood
• Temperature Setting
• Customized Filtration
a filtration cycle duration of 2 hours. To fully
utilize the unique capabilities of the control
system, it is important to know how to set the
temperature, operate the pumps, operate the
light, adjust the mode setting, and change the
filtration cycles.
NOTE: In event of a power outage or
failure, the Control System should retain all
settings, except time of day. If settings are
lost, re-program per the instructions in this
manual and contact your dealer.
Mood Lighting
Settings
Lighting
Settings
16