Setting Up The Corral And Otc Contactor - Lionel Operating Horse Car and Corral Owner's Manual

Setting up the Corral and OTC Contactor

F
ollow these steps to set up the corral and OTC Contactor.
For FasTrack layouts, use O Gauge Transition sections (available separately, 6-
Note!
12040) to join your track to a traditional O gauge track section for use with the OTC
Contactor.
1. Be sure to install the rubber feet on the bottom of the corral. The shorter end of the feet
should be exposed for O-27 gauge layouts; the taller ends should be exposed for O gauge
layouts. As illustrated in Figure 1, use a nail or a screwdriver inserted into the holes to help
you position the feet.
For O gauge track
Figure 1. Installing the corral feet
For O-27 gauge track