Immobilizer override procedure
Should the immobilizer become locked, you can
perform the "Immobilizer Override" procedure from
the instrument panel by entering the relevant
function as described below.
Enter the menu and go to page "COD.".
Note
This menu should only be active when at least
one Immobilizer error is present.
With this page selected, the initial code is always
displayed as "00000". If you hold pressed switch
(1Fig. 9), in position B "
access the procedure for entering the electronic code
given on the Code Card.
" for 3 seconds, you will
B for 3s
A
B for 3
A
B for 4
A
A
B for 2
A
A
A
B for 1
A
A
B for 5
A
NO
code
ok?
YES
Fig. 34
65