Replacing the bulbs
Before replacing a burnt-out bulb, make sure that the
new one matches the voltage and wattage
specifications in paragraph "Electric System" page
162.
Important
Have the bulbs changed at a Ducati Dealer or
authorised Service Centre.
Loosen the screw (1) and detach the lens (2) from the
turn signal support.
The bulb is of the bayonet-type: press and rotate
anticlockwise to remove. Fit the spare bulb by
pressing and turning clockwise until it clicks. Refit the
cup by inserting the tab into the corresponding slot in
the turn signal support. Refit and tighten the screw
(1).
2
1
Fig. 107
135