Table of Contents
Advertisement
FEATURES OF THE CAMERA SECTION
How to Use Skin Detail
(Cont'd)
Using the Skin Detail Function
To use the skin detail function set on the SKIN COLOR
ADJUST screen, select "ON" for the SKIN DETECT item on
the CAMERA PROCESS[1/2] menu screen.
In addition, you can use the LEVEL item to set three levels of
suppression of skin color area detail enhancement in the
video signal. X See page 78.
While the skin detail function operates, the "SD" indicator is
displayed on the STATUS 0 and STATUS 1 screen in the
viewfinder or LCD monitor.
"SD" display
STATUS 0
Confirming the color tone area adjusted
with the Skin Detail function
When you push the ZEBRA switch on the front panel to
"SKIN AREA", the skin detail function turns ON, and the color
area adjusted with the skin detail function is displayed in
color in the LCD monitor or viewfinder.
ZEBRA switch
MEMO
• When the REVERSE PICTURE item in the CAMERA
PROCESS[2/2] menu screen is set to ROTATE, skin
detail function is available but the detection area is not
displayed in the viewfinder or LCD screen.
• When COLOR GAIN item on the ADVANCED PRO-
CESS menu screen is set to "OFF", only the portion the
skin detail function is working is displayed in skin color.
X See page 80.
100
Outputting Color Bars
This device can output three types of color bars, depending
on the camera settings.
NTSC standard
: Outputs color bars compliant with the
SMPTE standard.
PAL standard
: Outputs color bars compliant with the
EBU standard.
16:9 screen
: Outputs multi-format color bars.
To output color bars, make the following settings.
1.
Turn the FULL AUTO switch to "OFF".
2.
Set the BARS item on the CAMERA OPERATION menu
screen to "ON". X See page 77.
• Color bars are output.
FULL AUTO switch
USER button
Outputting color bars using the USER buttons
1.
Turn the FULL AUTO switch to "OFF".
2.
Assign "BARS" to one of the USER1, 2 or 3 buttons.
X See "SWITCH MODE Menu Screen" on page 83.
3.
Press the USER button to which "BARS" was assigned.
• Color bars are output.
MEMO
• You can select whether to output an audio test signal
during color bar output using the TEST TONE item on
the AUDIO/MIC[1/2] menu screen. X See page 84.
• Color bars are not output when FULL AUTO mode is ON
or in VTR mode.
101
Advertisement
Table of Contents
