Table of Contents
Advertisement
PLAYBACK MODE
Outputting Audio
Setting
Confirm that this device is in the VTR mode.
(VTR indicator: On)
MONITOR
VTR indicator
SELECT switch
VF BRIGHT
USER 1
USER 2
USER 3
SHUTTER
ND FILTER
LCD BRIGHT
CAM/VTR
-
+
2
dial
1
MENU
AUDIO SELECT
TC
CH-1
CH-2
DISPLAY
GENE.
TC
FREE
AUTO
UB
REC
MANU
STATUS
REGEN
WHT.BAL
STATUS
AUTO
AUTO
AUDIO
LEVEL
CH-1
CH-2
button
ON
OFF
POWER
REC
CAM/VTR button
AUDIO menu screen
Earphone terminal output audio
Audio output is as shown in the table below depending on
the MONITOR SELECT switch and AUDIO MONITOR
and PB AUDIO CH [DV] settings on the AUDIO menu
screen.
PB AUDIO CH [DV]
MONITOR
SELECT
AUDIO MONITOR
CH-1
-
L/R: CH1
BOTH
MIX
L/R: CH1+CH2
STEREO
L: CH1 R:CH2
CH-2
-
L/R: CH2
* In HDV format, you can only select the settings within the bold frame.
62
1.
Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2.
Set the AUDIO menu screen.
• PB AUDIO CH [DV] Items
CH1/2
: To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX
: To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
CH3/4
: To reproduce the sound after-recorded
on CH-3 and CH-4.
AUDIO OUT connector
PB AUDIO CH [DV]
CH-1
CH-2
CH1/2
CH1
CH2
MIX
CH1+CH3
CH2+CH4
CH3/4
CH3
CH4
For HDV format, audio is output to CH1 and CH2 no matter
the settings.
3.
Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is employed.
This device records audio on the two channels CH-1 and
CH-2. (4-channel recording is possible in the case of DV
input.)
When this device is used for playback of a tape that was
recorded on another unit with audio recorded on the CH-3
and CH-4 channels, the PB AUDIO CH [DV] item on the
AUDIO menu screen must be set.
After-recording on the CH-3 and CH-4 channels is not pos-
sible.
CH1/2
MIX
CH3/4
L/R: CH1+CH3
L/R: CH3
L/R: CH1+CH2+CH3+CH4
L/R: CH3+CH4
L: CH1+CH3 R: CH2+CH4
L: CH3 R: CH4
L/R: CH2+CH4
L/R: CH4
USING EXTERNAL COMPONENTS
Connecting the Video
Signal Cables
Connecting the IEEE1394 Cable
To reduce the emission of unwanted radio waves, be sure to
attach the provided clamp filter as shown in the figure below.
• Attach the clamp filter as close to this device as possible,
as shown in the figure.
• Set the IEEE1394 switch on the left panel of this device.
DV
: DV format
HDV
: HDV format
IEEE1394 switch
Clamp filter
Wind once
CAUTION
When connecting the IEEE1394 cable from/to Camcorder,
VCR and other IEEE1394 device, make sure the following
instructions, otherwise the IEEE1394 circuit device may be
destroyed.
• Turn the power of both devices OFF and connect the
IEEE1394 cable.
• Do not insert incorrectly (in reverse) the IEEE1394 cable
end to IEEE1394 port of both devices.
X
• Do not connect the IEEE1394 cable under the condition
of static electricity.
• Turn the power of both devices OFF when changing the
IEEE1394 switch from/to HDV/DV.
Displaying Alarms
• CHANGE 1394 SWITCH
Displayed when the setting for the input/output video format
from the IEEE1394 connector and the setting for the
IEEE1394 switch are different.
Set the IEEE1394 switch so it matches the video format.
C H A N G E 1 3 9 4 S W I T C H
63
Advertisement
Table of Contents
