Preparations; Basic System; Attaching The Zoom Lens; Attaching The Microphone (Provided) - JVC GY-HD200CHE Instructions Manual

PREPARATIONS

Basic System

Shoulder Belt
Microphone
XLR 3P
Earphone
Focus Manual Unit
*1 HZ-FM13 (FUJINON)
HZ-FM15 (CANON)
Microphone
1/3 Zoom Lens
Th13 × 3.5BRMU (FUJINON)
USER 1
ND FILTER
Wide Converter 2
1
WCV-82SC
WHT.BAL
ON OFF
1/3 Zoom Lens
POWER
Focus Manual Unit
Th16 × 5.5BRMU (FUJINON)
*1 (Excluding the CHU/CHE model)
SD Memory Card
Zoom Servo Unit
HZ-ZS13B
GY-HD200U/GY-HD200E/GY-HD201E
Standard Package
Mount Converter
(1/2r1/3): ACM-12
(2/3r1/3): ACM-17
Tripod Base
1/2 Zoom Lens
S14 × 7.3B12U (FUJINON)
S17 × 6.6BRM (FUJINON)
S20 × 6.4B12U (FUJINON)
YH16 × 7K12U (CANON)
Carrying Case
YH19 × 6.7K12U (CANON)
2/3 Zoom Lens
Dolly
1
* An HZ-FM13 cannot be used with a Th16 × 5.5BRMU or S14 × 7.3B12/U zoom lens.
Use a FUJINON focus manual unit (FMM-8, CFH-3, CFC-12-990).
For details, please consult your JVC authorized dealer.
32
Component Cable
BNC
Composite Cable
RCA pin
Audio Cable
RCA pin
IEEE1394 Cable
6P-6P
For GY-HD200U
VF BRIGHT
USER 2 USER 3
MENU
Anton Bauer
STATUS
Anton Bauer
Battery Charger
AUTO AUDIO AUTO
CH-1 LEVEL CH-2
Battery
REC
Battery mount
For GY-HD200E/GY-HD201E
GY-HD200U: Gold Mount
Non-linear Editing System
GY-HD200E: V Mount
GY-HD201E: V Mount
IDX
IDX (Endura)
Battery Charger
Battery
XLR 4P
AC
AC Adapter
Remote Control Unit
Tripod
RM-LP55/RM-LP57

Attaching the Zoom Lens

1.
Loosen the mount ring.
2.
Attach the lens with its pin aligned with the hole in the
mount.
3.
Tighten the mount ring.
4.
Monitor
Connect the cable connector.
5.
Clamp the lens cable.
Hole
Monitor
HDD Unit
DR-HD100
Clamp
DV VTR
CAUTION
BR-HD50
• Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
• Set this device's power switch to "OFF" before the zoom
lens is attached or detached.
Attaching the Microphone
(Provided)
Connect the provided microphone to the microphone holder.
Provided microphone is a phantom microphone.
1.
Turn the knob on the microphone holder anticlockwise to
loosen it and open the microphone holder.
2.
Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from
interfering with the cassette cover.
3.
Turn the knob on the microphone holder clockwise to
secure the microphone.
4.
Connect the microphone cable to the INPUT1 or INPUT2
input connector on this device.
5.
Attach the microphone cable to the clamp.
6.
Make sure to perform the correct setting for use of a
phantom microphone.
X See page 55.
1. 3.
Knob
Pin
4.
INPUT1, 2 connector
How to Attach the View-
finder
1.
To attach the viewfinder, slide it in the direction of the
arrow.
2.
Set the viewfinder to a comfortable position and then turn
the slide mounting ring and mount.
To take off the viewfinder, pull the knob in the direction of
the arrow as you slide the viewfinder.
Knob
Taking off the viewfinder
2.
Microphone
Microphone
holder
5.
Clamp
2.
Slide mounting ring
1.
33