Camera Image/Page Display Troubleshooting - Panasonic BL-C1A Troubleshooting Manual

Camera Image/Page Display Troubleshooting

Problem
The camera
cannot be
accessed.
• The camera IP address has changed.
Enter the correct IP address in the address bar of the web
browser.
• When accessing from the Internet, the default gateway or the
DNS server address is not set in network settings, or is not set
correctly.
Set the correct default gateway and DNS server address.
Especially, when the DynamicDNS service is used, the IP
address must be set correctly (see page 31 of the Operating
Instructions on the CD-ROM).
• The connection type is wrong (see page 35 of the Operating
Instructions on the CD-ROM).
If the camera does not connect to the network using the [Auto
Negotiation] setting, set up the camera and the router
referring to the following table.
Network Camera
Router or hub
Auto Negotiation
Full Duplex
100Base-
TX
Half Duplex
Full Duplex
10Base-T
Half Duplex
[For assistance, please call: 1-800-272-7033]
Cause and Remedy
100Base-TX
Auto
Negotiation
Full
Duplex
—
—
—
— —
—
Troubleshooting
10Base-TX
Half Full
Half
Duplex Duplex
Duplex
—
— —
—
— —
— —
— —
9