Operating Instructions (Additional Features)
Additional Feature table
The following features are added to the camera. Read both Operating Instructions
manuals before starting to use the product.
Additional Features
Banner can be displayed
(Added to page 10 of the
Operating Instructions on the
Setup CD-ROM.)
Banner can be set
(Added to page 47 of the
Operating Instructions on the
Setup CD-ROM.)
Save button is added on the
Buffer/Transfer page
(Added to page 51 and page 58 of
the Operating Instructions on the
Setup CD-ROM.)
Sensor deactivation after initial
detection
(Added to page 61 of the
Operating Instructions on the
Setup CD-ROM.)
Turn the indicator on during the
sensor reaction
(Added to page 69 of the
Operating Instructions on the
Setup CD-ROM.)
Model No.
Contents
When the camera accesses the
Internet, the banner displays product
information about cameras or
announcements about the latest
firmware, etc. from Panasonic..
When checked, the banner is displayed
for administrator or general users or
both.
You can change the trigger enable/
disable setting of the buffer/transfer
feature.
You can set sensor deactivation time
during which the sensor does not work
in order not to send too many E-mails
to a mobile phone.
You can set indicator to light orange
during the sensor reaction.
Network Camera
BL-C10A
Page
page 2
page 3
page 4
page 5
page 6