Specifications - Makita BFT020F Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
-1
No load speed (min )
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
BFT020F BFT021F
0.5 - 2 N•m 0.5 - 2 N•m
0.5 - 2 N•m 0.5 - 2 N•m
540 320
200 x 65 x 251mm
(with Battery Cartridge BH9020/BH9020A)
200 x 65 x 274 mm
(with Battery Cartridge BH9033/BH9033A)
BFT040F BFT080F
1 - 4 N•m 3 - 8 N•m
1 - 3.5 N•m 3 - 6.5 N•m
950 540
1.4 kg
D.C.9.6V
END004-4
Model BFT020F, BFT021F, BFT040F, BFT042F,
BFT080F, BFT081F, BFT122F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Model BFT123F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE033-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENF002-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
2
BFT122F BFT042F
5 - 12 N•m 1 - 4 N•m
5 - 10 N•m 1 - 3.5 N•m
320 1,200
200 x 71 x 242 mm
(with Battery Cartridge BH1220C)
200 x 71 x 251 mm
(with Battery Cartridge BH1233C)
) : 70 dB(A) or less
pA
) : 71 dB(A)
pA
Wear ear protection
) : 2.5 m/s
h
2
BFT081F BFT123F
3 - 8 N•m 5 - 12 N•m
3 - 7.5 N•m 5 - 12 N•m
700 390
1.5 kg
D.C.12V
ENG900-1
2
or less
ENG901-1