Table of Contents
Advertisement
Changing the DHCP Server Settings
8.4
Subnetwork
74
FRITZ!Box Fon WLAN 7170 – 8 Network Settings
Changing the DHCP Server Settings
Proceed as follows to open the DHCP server settings:
1.
Open the FRITZ!Box Fon WLAN user interface (see the
section "Opening the User Interface" from page 33).
2.
Click "Expert Mode" in the "System" menu, enable the
setting "Show expert settings" and confirm this setting
by clicking "Apply".
3.
Open the "System / Network Settings" menu.
4.
Click the "IP Addresses" button.
The "IP Settings" page is opened. Here you can make
the settings for the DHCP server.
By default the option "All computers are located in the same
IP network" is enabled in the FRITZ!Box Fon WLAN.
Factory Settings
All computers are located in the same IP net-
work
IP address
Subnet mask
DHCP server
If the factory settings were not changed, this setting has the
following effect:
The DHCP server of the FRITZ!Box Fon WLAN assigns all of the
computers connected with the FRITZ!Box Fon WLAN an IP ad-
dress from the address pool of the DHCP server.
Address pool of the DHCP server:
This means that all of the computers connected with the
FRITZ!Box Fon WLAN are located in the same subnet.
enabled
192.168.178.1
255.255.255.0
enabled
192.168.178.20 - 200
Hide quick links:
Advertisement
Table of Contents
