Opening The User Interface - AVM FRITZ!Box Fon WLAN Installation And Operation Manual

3

Opening the User Interface

Once you have connected FRITZ!Box Fon WLAN with one or
more computers, or with a network hub or switch, you can
configure the settings for operation with FRITZ!Box Fon
WLAN.
The settings are configured on the FRITZ!Box Fon WLAN user
interface. This interface can be accessed from any of the
computers connected with the FRITZ!Box Fon WLAN. The set-
tings are saved in the FRITZ!Box Fon WLAN.
There are two ways to open the FRITZ!Box Fon WLAN user in-
terface:
with the FRITZ!DSL software
Install the FRITZ!DSL software included in the FRITZ!Box
Fon WLAN package on your computer, and open the
FRITZ!Box Fon WLAN user interface from the FRITZ!DSL
Start Center.
with a web browser
Open your Internet browser on the computer and enter
fritz.box.
The "fritz.box" address entry in the address field of an Internet
browser
When the FRITZ!Box Fon WLAN user interface is started,
FRITZ!Box Fon WLAN is ready for operation.
The FRITZ!Box Fon WLAN user interface has several pages,
each of which can be accessed directly by clicking the menu
command on the left edge.
FRITZ!Box Fon WLAN 7170 – 3 Opening the User Interface
Opening the User Interface
33