Communicating with a
reader/writer
Hold the FeliCa mark up to a reader/writer
(device near a store's cash register, which
reads and writes FeliCa data) to exchange
data with the reader/writer.
FeliCa
mark
• When holding the FeliCa mark up to the
reader/writer, take care not to bump the
product hard against the reader/writer.
• Position the FeliCa mark so it is centered
on and parallel with the reader/writer.
• Slowly move the FeliCa mark up to the
reader/writer.
• If the FeliCa mark cannot be read even if it
is centered on the reader/writer, try raising
the product up a bit, or shift the product
slightly up, down, left, or right.
• The FeliCa mark may not be scannable if
there is a metal object between the mark
and the reader/writer. Also, note that
putting a sticker or something near the
FeliCa mark may affect communication
performance.
memo
◎
You can write data with a reader/writer even
®
if an Osaifu-Keitai
compatible app is not
running.
139