■
Exiting the vibrate mode/silent
mode
▶
Slide the status bar downwards. Tap
[Settings], [Sound], [Sound profile],
[Normal].
• You can also exit these modes by
pressing
memo
◎
Note that while the product is in the vibrate
mode/silent mode, the paging tone will not
sound even if you are using the earphones.
◎
The camera shutter sound and game sounds
are emitted even while the product is in the
vibrate mode/silent mode.
◎
You can also enter the vibrate mode/silent
mode by holding down
the indications shown below appears on the
display.
Vibrate mode
.
until either of
Silent mode
Settings for using the
product outside of Japan
This product supports GLOBAL PASSPORT
GSM and GLOBAL PASSPORT CDMA. To
use this product outside of Japan, you must
obtain the latest PRL (Preferred Roaming
List) while in Japan, and, after reaching
your destination, you must configure
settings for the area where you will be using
the product.
• You can use your standard phone number
to talk over the worldwide GSM network
and UMTS network, and the CDMA
network.
145