Driver Installation - JVC GR-PD1 Instructions Manual

Driver Installation

Installing the driver for importing MPEG-format video stream
When you connect the camcorder to the PC with an i.LINK cable at first time, the following steps must be
required for installing the correct driver.
1
Click [Install from a list or specific location (Advanced)]
and then click [Next].
The driver search dialog box appears.
2
Click [Don't search. I will choose the driver to install], and
then click [Next].
The [Hardware Update Wizard] dialog box appears.
3
Click [Sound, video and game controllers], and then click
[Next].
The dialog box to select the manufacture and model appears.
4
Click [JVC] for manufacture and [JVC Tape Device] for
model, and then click [Next].
The [Update Driver Warning] dialog box appears. If not, go to
step 6.
5
Click [Yes].
The [Completing Found New Hardware Wizard] dialog box
appears.
6
Click [Finish].
— 9 —
CONTINUED ON NEXT PAGE