JVC GR-PD1 Instructions Manual page 54

54
EN
To use this camcorder as a recorder
Dubbing from other devices in MPEG2 format is
possible if the connected device is another same
model of this unit.
1
Perform step 1 to 4 of "To use this camcorder as a
player" ( pg. 53).
2
Set "REC MODE" to "SP" or "LP". (
3
Turn on the video unit's power.
4
Insert the source cassette in the video unit.
5
Insert the recording cassette in this camcorder.
6
Press the Recording Start/Stop Button to engage
the Record-Pause mode.
The " " indication appears on the
i.LINK IN
screen.
7
Press the Recording Start/Stop Button to start
recording.
The indication rotates.
8
Press the Recording Start/Stop Button again to
engage the Record-Pause mode.
The indication stops rotating.
9
Repeat steps 7 – 8 for additional editing. Stop the
video unit and camcorder.
NOTES:
DV to DV dubbing
If a blank portion or disturbed image is played
back on the player during dubbing, unusual
images may be dubbed or the dubbing may stop.
MPEG2 to MPEG2 dubbing
It is not possible to dub signals in MPEG2 format
pg. 33, 34)
from devices other than another same model of
this camcorder.
MPEG2 signals that are copy-guarded may not be
recorded with this camcorder.
When dubbing MPEG2 video to the camcorder,
image may not appear on the LCD monitor or
viewfinder. However, the recording is performed
properly.
DUBBING (cont.)