JVC GR-PD1 Instructions Manual page 104

Reinstalling the driver
If the camcorder's model name does not appear in MPEG Capture Utility in spite of proper settings, the driver
may not be correctly installed. In this case, you have to reinstall the driver by performing the following steps.
1
Click [Start], right-click [My Computer], and then click
[Property].
The [System Property] window appears.
2
Click the [Hardware] tab, and then click [Device Manager].
The [Device Manager] window appears.
3
Double-click [Sound, video and game controllers].
4
Right-click [JVC Tape Device], and then click [Uninstall].
If [JVC Tape Device] is not displayed, delete [AV/C Tape Recorder/
Player] in [Other Devices].
The confirmation screen appears.
5
Click [OK].
6
Disconnect the i.LINK cable, and connect it again.
After a moment, the [Found New Hardware Wizard] dialog box
appears.
7
Reinstall the driver. ( pg. 9)
— 16 —